Ultimate Electrical Power System Engineering Masterclass
Size
8.5 GB
Seeders
6
Leechers
1
Files
98
Category
Added
at 6:18pm GMT+1
Status
Infohash
628b7934613c7dac9d9088ff8478d69dd51a2304
Description
Description
Hi and welcome everyone to our course “Ultimate Electrical Power System Engineering Masterclass”
In this course, you are going to learn everything about power system analysis starting from the power system basics and fundamentals of single phase and three phase electric systems moving to designing and modelling different power system components such as: generators, transformers, and transmission lines, ending with a complete power system studies such as load flow studies and power system faults analysis.
Thus, this course will be your complete guide in one of the main areas of power engineering: ( power system analysis )
The course is structured as follows:
Firstly, an overview on the power system structure is illustrated through the following topics:
Generation, transmission, distribution, and consumption of electric power
How to draw a single line diagram (SLD) of any power system
Then, the next topic will be about a review on basic electrical engineering concepts to be a quick refresh for you. The following topics will be covered:
Different types of powers in power system
Complex power, power triangle, and power factor definitions
power factor correction
Complex power flow in any power system
Then, a complete study of three phase systems is introduced since 99% of practical electric networks are actually three phase systems. Thus, three phase circuits are explained in depth through the following topics:
Why we need three phase systems?
Three phase supply and load
Different 3-ph connections (star-star), (star-delta), (delta-star), (delta-delta)
Difference between (3-wire) and (4-wire) 3-ph systems
The relations between line and phase currents and voltages
Power analysis in 3-ph systems
Power factor improvement in 3-ph circuits
Then, you are going to learn the modelling and characteristics of generators in power systems starting from the operation and construction of alternators moving to measuring the performance indices of synchronous generators. The following topics will be covered:
Construction and operation of alternators
Salient pole vs. Cylindrical rotor generators
Generator model in power systems
Generator phasor diagram and characteristics
Generator performance parameters
Power angle curve of synchronous generators
The next topic is about transformers and their use in power systems. We are going to discuss how the transformers work and their importance in power systems through the following outlines:
Construction and operation of transformers
Transformer equivalent circuit
Tests performed on transformers
Transformer efficiency and regulation
Three-phase transformer types and connections
Per phase model of three phase transformer
After that, we are going to a complete modelling of different types of transmission lines with assessing the transmission line performance in electric networks through the following topics:
Overhead lines vs. Under ground cables (UGC)
Transmission line modelling and performance
Short, medium, and long line models
Lossless transmission lines
Surge impedance loading (SIL)
Now, after modelling and analyzing different power system components, lets move to the per unit system and learn the concept and importance of per unit in power system analysis through the following outlines:
Concept of per unit
Per unit calculations
How to draw per unit reactance diagram
Change of base
Numerical examples on practical power systems
Then, we are going to a complete power flow analysis where we are going to know the electrical parameters for any power system under any operating conditions. The following topics are discussed
Concept and importance of power flow study
Definitions in power flow analysis
Types of power system buses
Formation of Ybus
Approximate method
Iterative methods for load flow analysis
Gauss-Seidal method
Power flows and losses analysis
DC power flow method
Numerical examples on practical power systems
Then, a complete fault analysis is performed on power systems to find the fault current, bus voltages and line current during the fault. All these outlines are discussed
Definition, causes, types, and consequences of electric faults
Complete symmetrical fault analysis using thevenin and Zbus
Symmetrical components and sequence networks
Complete unsymmetrical fault analysis using thevenin and Zbus
Finally, after the complete analysis of power system, practical projects are performed on MATLAB related to power systems as follows :
Project 1 – Stand alone synchronous Generator
Project 2 – Synchronous Generator connected to the grid
Project 3 – Simulation of 3-ph transformers
Project 4 – Transmission line design
Project 5 – Power flow study in MATLAB
Project 6 – Fault analysis in MATLAB
So, if you are Looking for a COMPREHENSIVE course about Electrical power system analysis engineering for power system modelling, design and analysis ?
If your answer is YES, then you’re definitely in the right place.
Who this course is for:
Any one having the passion to learn power system engineering from scratch
Electrical power engineers with an interest in power system analysis
Requirements
Electrical engineering fundamentals
Passion to learn power system engineering
Last Updated 3/2023
File list
- Ultimate Electrical Power System Engineering Masterclass
Rating
Similar torrents
| Name | Size | Date | |||
|---|---|---|---|---|---|
| 3.7 GB | 1 | 0 | |||
| 44 MB | 1 | 0 | |||
| 32 MB | 0 | 1 | |||
| 949 MB | 0 | 2 | |||
| 2.5 GB | 0 | 0 | |||
| 2 MB | 0 | 3 | |||
| 54 MB | 0 | 0 | |||
| 2.7 GB | 0 | 1 |